957H Wheel Loader

Features

Wheel Loader 957H
1. The 957H Wheel Loader is equipped with reliable ShangChai SC11CB220G2B1 engine or genuine Cummins engine.
2. This Wheel loader adopts 3 forward and 3 reverse power shift transmission.
3. The combined seal cylinder adopted by this wheel loader obtains high seal performance and more reliability.

Technical Paramters

Overall Dimension
1	Length (with bucket on ground)			8130(mm)
2	Width (to the outside of wheels)			2800(mm)
3	Bucket width			2946(mm)
4	Height (to the top of the cab)			3450(mm)
5	Wheel base			3200(mm)
6	Tread			2200(mm)
7	Min. ground clearance			450(mm)
Main Technical Specification
1	Rated load			5000(Kg)
2	Operating weight			16700KG
3	Rated bucket capacity			3.0(m3)
4	Max. breakout force			165kN
5	Max. traction force			150kN
6	Max. dump clearance			3100(mm)
7	Dump reach			1150(mm)
8	Dump angle at any position			≥45°
9	Digging depth (with bucket bottom horizontal)			165(mm)
10	Min. turning radius
	(1) Outside of bucket			6775(mm)
	(2) Outside of front wheel			6098(mm)
11	Pivot angle frame			38°
12	Oscillating angle of rear axle			+11°
13	Lifting time of bucket			≤5.6(sec.)
14	Lowering time of bucket			≤3.7(sec.)
15	Dumping time			≤1.7(sec.)
16	Traveling speed (Km/h), 3 forward and 3 reverse
	(1) 1st gear		6.8/8
	(2) 2nd gear		10.8/14.3
	(3) 3rd gear		32/34.1
Diesel Engine
1	Model	Cummins 6CT AA 8.3-C215 (TIER2)	ShangChai SC11CB220G2B1 Engine
2	Type	Direct injection. Turbocharge. Water cooling
3	Rated output	158 (kW)	162(Kw)
4	Inter-bore of cylinder/stroke	114/135 (mm)	121/152(mm)
5	Total exhaust of cylinder	8.3 (L)	10.5(L)
6	Model of starting motor	42MT	KB-24V
7	Power of start motor	8.2(KW)	7.5(KW)
8	Voltage of starting motor	24(V)	24(V)
9	Rated speed	2200(r/min)	2200(r/min.)
10	Max. Torque	998(N.M)	843±6%(N.m)/(1400r/min)
11	Starting type	Electric	Electric
12	Min. specific fuel consumption	207(g/Kw.h)	230(g/Kw.h)
13	Engine specific oil consumption	0.9-1.6(g/Kw.h)	0.95-1.77(g/Kw.h)
14	Net weight	617(kg)	960(Kg)
Transmission System
1. Torque Converter
1	Model		957H.2
2	Type		3-elements. Single stage
3	Torque ratio		3.35
4	Cooling type		Pressure oil circulating
2. Transmission Case
1	Model		CHANGLIN 957H.4
2	Type		Power shift, constant- mesh spur gear
3	Gear shift position		3 forward and 3 reverse gears
3. Axle and Tire
1	Type of main reducer		Spiral bevel gear, single stage
2	Gear ratio of main reducer		4.625
3	Type of final reduce		Single stage planetary
4	Gear ratio of final reducer		4.9286
5	Gear ratio		22.795
6	Max. drawing force		150kN
7	Size of tire		23.5-25-16PR
Working Device Hydraulic System
1	Model of oil pump		JHP 3160
2	System pressure		180(kgf/cm2)
3	Model of multi-way directional valve		GDF-32-YL18/D32II-YL20
4	Pilot supply valve		DGf-00 (Gaoyu)
5	Pilot valve		DJS2-UX/UU
6	(D×L) Dimension of lifting cylinder		Ф160×90×810(mm)
7	(D×L) Dimension of tilt cylinder		Ф180×90×528(mm)
Steering System
1	Type		Middle articulated frame. Full-Hydraulic steering
2	Model of steering pump		JHP2080S
3	Model of redirector		TLF1-E1000B+FKB6020
4	Model of priority valve		YXL-F250F-N7
5	System pressure		16MPa
6	Dimension of steering cylinder		Ф90×45×435(mm)
Brake System
1	Type of traveling brake		Caliper disc brake Dual pipelines, air over oil activate 4 wheel brake
2	Air pressure		6-7.5(kgf/cm2)
3	Type of emergency brake		Manual control cutting-off air brake
4	Type of parking brake		Inner expand hoof Automatic boosting. inner expand hoof
Oil Capacity
1	Fuel(diesel)		250(L)
2	Engine lubricating oil		Cummins: 20(L) ShangChai: 27(L)
3	Oil for converter and gear box		42(L)
4	Oil for hydraulic system		180(L)
5	Oil for driving axles (F/R)		18/18(L)

 

Our products will be continuously improved with the progressing of the technique without  notice