996 Wheel Loader

Features

Wheel Loader 996
The wheel loader is equipped with a reliable original Cummins engine, ZF transmission case and torque converter. Also, it comes with original ZF wet-type axles with multi-disc limited-slip differentials. Its KD switch assures higher efficiency and easy operation. Its 24° cone-shaped seal cylinder comes with high sealing performance.
In addition, the wheel loader is designed with a single brake valve, dual pipe fully hydraulic brakes and central lubrication system.e

Technical Paramters

Overall Dimension
1	Length(with bucket on ground)	9343(mm)
2	Width(to outside of wheels)	3200(mm)
3	Bucket width	3500(mm)
4	Height(To the top of the cab)	3832(mm)
5	Wheel base	3650(mm)
6	Tread	2450(mm)
7	Min. ground clearance	461(mm)
Main Technical Specification
1	Rated load	9000(Kg)
2	Operating weight	31500kg
3	Rated bucket capacity	5.1(m3)
4	Max. breakout force	264KN
5	Max. Drawing force	269 KN
6	Max. dump clearance	＞3325(mm)
7	Dump reach	1400(mm)
8	Dump angle at any position	≥450
9	Digging depth	250(mm)
10	Min. turning radius
	(1)Outside of bucket	7511(mm)
	(2)Outside of rear wheel	6614(mm)
11	Pivot angle frame	400
12	Oscillating angle of rear axle	+12o
13	Lifting time of bucket	6.0(sec.)
14	Lowering time of bucket	3.4(sec.)
15	Dumping time of bucket	1.6(sec.)
16	Traveling speed(Km/h)
	(1)1st gear (Forward & reverse)	6.4
	(2)2nd gear (Forward & reverse)	11.94
	(3)3rd gear (Forward & reverse)	18.72/25.92
	(4)4th gear (Forward)	37
Diesel engine
1	Model	Original Cummins M11-C335 M11-C335
2	Type	Direct injection. Turbocharged. Water cooling
3	Rated output	250(Kw)
4	Inter-bore of cylinder/stroke	125/147(mm)
5	Total exhaust of cylinder	10.8(L)
6	Model of starting motor	39MT-HD
7	Power of starting motor	8(KW)
8	Voltage of starting motor	24(V)
9	Rated speed	2100(r/min.)
10	Max. Torque	1674(N.m)
11	Starting type	Electric
12	Min. specific fuel consumption	215(g/Kw.h)
13	Engine specific oil consumption	1.0 (g/Kw.h)
14	Net weight	984(Kg)
Transmission System
1. Torque Converter
1	Type	3-element.single stage
2	Torque ratio	2.511
3	Max. Dia. of flow path	400(mm)
4	Cooling type	Pressure oil circulating
2. Gear Box
1	Model	ZF4WG310
2	Type	Power shift, spur gear constant-mesh
3	Gear shift position	4 Forward and 3 reverse gears
3. Axle and Tire
1	Type of main reducer	Spiral gear single stage
2	Gear ratio of main reducer	5
3	Type of final reducer	single stage planetary
4	Gear of ratio of final reducer	5.4
5	Total ratios	27
6	Size of tyre	29.5-25 -22PR(L-3)
Working Device Hydraulic System
1	Model of oil pump	AV0V0 100 DRS/53R-VWC12G60
2	System pressure	26(MPa)
3	Model of Muti-way directional valve	M6-1416-00/3M6-22EH
4	(d*l)Dimension of lifting cylinder	2-Ф200*110*790(mm)
5	(D*l)Dimension of tilting cylinder	1-Ф225*125*575(mm)
Steering System
1	Type	Middle articulated frame. full hydraulic power
2	Model of steering pump	HA10VO110DFR1/31R-VWC 12 H00
3	Model of redirector	150-7170
4	Model of Magnify valve	150F0040
5	System pressure	21MPa
6	Dimension of steering cylinder	2-Ф110*55*486(mm)
Brake System
1	Type of traveling brake	Wet type multi-disc brakeSingle brake valve& dual pipe, full hydraulic brake
2	Braking pump	AZPF-11-016-RRR20KB-S0023
3	System pressure	16 (MPa)
4	Type of emergency brake	Lower pressure alarm brake
5	Type of parking brake	Electric control brake
Oil Capacity
1	Fuel(diesel)	480(L)
2	Engine oil	32(L)
3	Oil for converter and gear box	43(L)
4	Oil for hydraulic system	260(L)
5	Oil for driving axles(F/R)	51(L) for each

 

Our products will be continuously improved with the progressing of the technique without  notice