CDM835 Wheel Loader
Technical Paramters
Overall Data |
|
|||
Bucket Capacity (m3) |
1.8 |
|||
Rated Payload(kg) |
3500 |
|||
Operating Weight(kg) |
11620±300 |
|||
Traction Force(kN) |
106±3 |
|||
Breakout Force(kN) |
103±3 |
|||
Travel speeds (km/h): |
||||
|
I |
II |
III |
|
Forward |
6.5 |
12.0 |
32.0 |
|
Reverse |
6.8 |
12.5 |
33.5 |
|
Engine |
WP6G140E22\ DF CUMMINS 6BT5.9-C130 |
|||
Rated Power(kW/rpm) |
105/2200 97/2200 |
|||
Peak Torque(Nm/rpm) |
580/1400 560/1400-1600 |
|||
Starting Voltage(V) |
24 |
|||
Drive Train |
|
|||
Torque Converter |
Single-stage, Single-turbine, 3-element |
|||
Torque Ratio |
3.2 |
|||
Transmission |
Countershaft Powershift Transmission |
|||
Gear |
3F/3R |
|||
Pressure of Transmission(MPa) |
1.1~1.5 |
|||
Main Reducer |
Spiral Bevel, 1-stage Reduction |
|||
Final Reducer |
Planetary Reduction |
|||
Tire |
17.5-25 L-3 12PR TT |
|||
Brake System |
|
|||
Service Brake |
Single Circuit Caliper,Dry Brake |
|||
Setting Pressure (MPa) |
0.7-0.78 |
|||
Parking Brake |
Flexible Shaft Controlled Caliper |
|||
Emergency Brake |
Flexible Shaft Controlled Caliper |
Steering System |
|
||
Type |
Hydraulic Load Sensing System |
||
Cylinders-bore×Stroke(mm) |
2-80×315 |
||
Steering Pump |
Gear Pump |
||
System Pressure(MPa) |
15 |
||
Flowrate(L/min/rpm) |
88/2200 |
||
Steering Angle |
±35° |
||
Hydraulic System |
|
||
Lift Cylinders-bore×Stroke(mm) |
2-125×784 |
||
Tilt Cylinder-bore×Stroke(mm) |
1-140×553 |
||
Model of Implement Pump |
Gear Pump |
||
Flowrate(L/min/rpm) |
246/2200 |
||
System Pressure(MPa) |
16 |
||
Pilot Control System Pressure (MPa) |
2.5 |
||
Hydraulic Cycle Time, Rated Load in Bucket(in second): |
|||
Raise(Loaded) |
Dump |
Lower(Empty) |
Total |
5.5 |
1.3 |
3.7 |
10.5 |
Electrical System |
|||
System Voltage(V) |
24 |
||
Battery (2 in series)(Ah) |
105 |
||
Lamp Voltage(V) |
24 |
||
Service Refill Capacity |
|
||
Fuel Tank(L) |
200 |
||
Hydraulic Tank(L) |
173 |
||
Crankshaft(L) |
17 |
||
Transmission(L) |
36 |
||
Front Axle(L) /Rear Axle(L) |
18.5/18.5 |
||
Air Conditioning System |
|
||
Heating Capacity(W) |
5900 (±10%) |
||
Cooling Capacity(W) |
4800 (±10%) |
Our products will be continuously improved with the progressing of the technique without notice
- In the previous :CDM833 Wheel Loader
- The next article :CDM843 Wheel Loader