CLG825C Wheel Loader

Features

Operator Comfort and Safety
Adjustable seat, and ergonomically designed placement of instruments.
Comfortable A/C and heated operator environment.Two mechanical lever controls.
Optional pilot control.Convenient detachable cab.
UV resistance glass. Cigarette lighter works as electrical outlet.
Easy to Maintain
Power cut-off function prevents damage to drive components.
Double sealed O-rings used in Hydraulic system.
Stress analysis tested to strengthen weak points.
Sub frame and rear axle swingable by 11 degrees .
Front frame box structure highly torsion and damage resistant.
Parts, Attachments and Service to count on.  
World class suppliers of key components.
Long life high performance multi valve from  Zhejiang Linhai.
Long life highly efficient Shantui transmission and converter used.
Performance  Reliable
Hydraulic system easily checked after removing front cover.
Easy engine access, convenient placement of key parts and fluid refill points.
Built for Efficiency
Turbo air filter removes over 90% of dust and impurities, reducing  engine wear and fuel consumption extending engine service life and improving engine efficiency. 
Radiator fan is directly engine driven and provides strong  efficient cooling.
38 degree angle of articulation for working in tight spaces.
Low fuel consumption engine that doesn't sacrifice any power.  
Very low cycle time of 8.6 second, great for efficient  for smooth strong gear changes.
Meets EU stage II/EPA tier 2 emission requirements.

Technical Paramters

Model		CLG825C
Bucket  performance		1.4m3
Operating weight		8,400 kg
Engine	emission regulation	Tier 2 / Stage II
	make	YT4M3Z-22
	gross power	75 kW (100 hp) @ 2,200 rpm
	net power	70 kW (93.8 hp) @ 2,200 rpm
	peak torque	401 N.m @ 1400-1,600 rpm
	displacement	9.7L
	number of cylinders	4
	aspiration	natural
Transmission	Transmission Type	counter shaft-type power shift
	Torque Converter	3 element-single stage,single phase
	Maximum Travl Speed.fwd	46.2km/h
	Maximum Travl Speed.rev	32.9km/h
	number of Speed.fwd	4
	number of Speed.rev	2
Brakes	Service Breake Type	caliper dry disc
	Service Breake Actuation	hydraulic
	Parking Brake Type	shoe/drum
	Parking Brake Actuation	mechanical
Hydraulic system	Main pump Type	gear
	Main Relief Pressure	18Mpa
	Raise	5.12 s
	Dump Time	1.2s
	Float Down Time	3s
	Fastest Total Cycel Time	9.40 s
Loader arm performance	Tipping load-straight	5612 kg
	Tipping load-Full Turn	5102 kg
	Bucket Breakout Force	83 kN
	Maximum Dump Angle at Full Height	45
	Dump Clearance at full height discharge	2,919 mm
	Dump reach at full height discharge	1174 mm
	Maximum hinge pin height	3,717 mm
	Maximum Digging depth,Bucket level	65 mm
	Bucket rollback at ground level	45
	Bucket rollback at carry	53
	Bucket rollback at maximum height	63.8
Dimensions	Length with bucket down	6,799mm
	width over tires	2260mm
	wheelbase	1570 mm
	wheel Tread	1850mm
	Ground Clearance	334mm
	Turn Angle,Either Side	38
	Rear Angle of Departure	27
	Turning Radius,Outside of Tire	5003 mm
	Turning Radius,Center of Tire	4,798mm
	Turning Radius,Bucket Carry	5490 mm
Service Capacities	FuelTank	100L
	Engine Oil	14.5L
	Cooling System	35L
	Hydraulic Reservoir	100L
	Transmission and Torque Converter	45L
	Axles,each	16L

Our products will be continuously improved with the progressing of the technique without  notice