SD13 Bulldozer
Features
● The extended track ensures low ground pressure, high reliability and strong traction, contributing to precise operation;
● The power shift transmission not only ensures smooth power shift, but also reaches target speeds and carries out directional transfers with a single control lever;
● The wet steering clutch and brake can extend service life. They work interactively, ensuring quick and flexible steering operations;
● The single control lever can control all blade actions;
● The drift sealing in the drive wheel, track roller and carrier roller can prevent dust from entering the track system, as well as lubricant leakage, thereby ensuring a long service life;
● The hexahedron cab features wide visibility, and the insulation materials in the cab can reduce noise and vibrations;
● The spin type fuel filter and dust separator, the air filters and the other filtration devices can prolong work time and reduce service time;
● The comfortable cab seat can adjust upward and downward, forward and backward, meeting any positional needs the operator may have;
● Side engine operation and the combination of a drive/brake operation system and foot brake makes overall operation of the bulldozer more rapid and convenient.
Technical Parameters
|
ITEM |
UNIT |
SD13 |
|
L×W×H (Ripper not included) |
mm |
4492×3185×2950 |
|
Operating weight (Ripper not included) |
t |
13.7 |
|
Engine |
- |
Shangchai SC8D143G2B1 |
|
Rated power |
kW/rpm |
95.5/1900 |
|
Gradeability |
° |
30 |
|
Blade type |
- |
Straight tilt blade Angle blade |
|
Blade width |
mm |
Straight tilt blade 3185×1090 Angle blade 3475×915 |
|
Dozing capacity |
m3 |
Straight tilt blade 3.7 Angle blade 3.4 |
|
Ma× drop below ground of blade |
mm |
590 |
|
Lift height of blade |
mm |
930 |
|
Ripper type |
- |
Three-shank ripper |
|
Ripping depth of ripper |
mm |
467 |
|
Lifting height of ripper |
mm |
559 |
|
Number of carriers (each side) |
- |
2 |
|
Number of track rollers (each side) |
- |
6 |
|
Number of track shoes (each side) |
- |
38 |
|
Width of track shoe |
mm |
460 |
|
Track gauge |
mm |
1880 |
|
Ground length and ground pressure |
mm/MPa |
2365-0.063 |
|
Pitch |
mm |
190 |
|
Forward speed |
km/h |
0–3.2 |
|
0–5.9 |
||
|
0–9.8 |
||
|
Reverse speed |
km/h |
0–3.9 |
|
0–7.1 |
- In the previous ：SD10YE Bulldozer
- The next article ：SD13S Bulldozer